MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG Midget and Sprite Technical - 1500 Mechanical fuel pump

Can anyone tell me if the sealing ring sits in the body of the pump or is sandwiched in between the body and top of the fuel pump.
Thanks





Scott Coe

This is for the Spitfire 1300, assuming (always dangerous) that the pumps don't vary that much and the drawing is correct.

To me it looks like the filter screen goes into the top part as the inlet with seal beneath it to sandwich and seal two halves of pump.



Nigel Atkins

Scotr
As you have it in the picture. Filter in the recess. Rubber now goes on top.
Alan
Alan Anstead

Alan ,
should the o ring just sit in the recess or overlap so it's squashed inbetween the body and the top ?
Scott Coe

Sorry Scott, Alan actual knowledge proves where assuming make an ass out of me, again.

And why to take photos at each stage of dismantling (always assuming things where installed correctly before of course!).
Nigel Atkins

Scott
It sits in the cover and on both the filter and the body thus it fulfils two functions holding the filter in place and sealing between body and cover.

leaks oft times occurred around the fixing bolt / screw so ensure you have a good fibre washer under the bolt / screw head and on top of the cover. A snigger of Blue Hylomar helps and can be applied to the rubber seal for 'belt & braces'. Don't over tighten the nut / screw.

Alan
Alan Anstead

Thanks Alan, much appreciated, Happy MGing !
Scott Coe

This thread was discussed on 21/05/2020

MG Midget and Sprite Technical index

This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.