Welcome to our resource for MG Car Information.
MG Midget and Sprite Technical - An Interesting Problem...
I just refitted my steering column and have come to refit the fascia surrounding it - the part containing the indicator stalk and wiring.
However, it looks like there's simply not enough space for it to fit - have I missed something? Can I shift something back or make more room somehow? What's going on?! I've posted a picture with this s you can visualise the problem.
Any help would be very much appreciated.
|Looks like your column is(might be) in too far, but also the boss on the steering wheel can stop you fitting the cowl. I have the same thing with my sprite. I have to pull the steering wheel to romove the cowl.|
|Would putting your car the right way up, rather than on its side help?|
I'll get my coat...
|Malcolm Le Chevalier|
|Undo the bolts holding up the columb and then fit the cowling followed by reinstalling the bolts.|
|Heres is a tip...instead of the fiddle screws on the far back side|
Use a long black zip tie...simple and easy and takes out all the fiddly ...it cowling fits just under the dash so the tie is never seen
|Prop and the Blackhole Midget|
This thread was discussed between 03/07/2013 and 04/07/2013
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.