MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG Midget and Sprite Technical - Brake Servo

Hi Guys and gals,

Do any of your have pictures/advice (and not the "don't do it" advice) for installing a powertune brake servo in a 1975 RHD midget. I'm unsure of where to mount it and get the correct orientations etc.

Thanks,

Bal
S Cotterill

Bal,
get a copy of Daniels book it's all in there.
Make sure you get the servo mounting bracket & bolt that to the spare pedal cover. I also used a one way valve to the inlet manifold.
Brad (Sprite IV 1380)

Bal,

I recently fitted one to my car - I think its well worth while - but I know not all agree.

A couple of pics attached.

It is quite a tight fit - i currently have a large air filter and had to mount a little further up towards the bulkead than Brad suggested - one fixing bolt used an existing threaded insert for lefthand drive peddle box.

I also have a one way valve fitted on my inlet manifold.
Routing the pipes needs care to ensure out of harms way and well secured with brackets - i used copper and they were 1.4metres long (yours may vary).

I am in Clevedon, N Somerset where are you in Somerset ? - if you want to see my installation you are welcome. 01275 872585

Richard.


richard boobier

And another.


richard boobier

This thread was discussed on 30/05/2009

MG Midget and Sprite Technical index

This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.