Welcome to our resource for MG Car Information.
|
MG Midget and Sprite Technical - Bulkhead/firewall map
Does anyone have a diagram or some clever way of demonstrating which cable goes through which hole in the bulkhead of a LHD - '72 midget? I have main wiring lines OK and wiper thingy but how do the choke, hoodpull, oil/water capillery etc. travel..? Thanks! Simon |
Simon Fryer |
here is a discussion from another forum that covers most of the LHD holes for you: http://www.mgexperience.net/phorum/read.php?3,1251136,1251141#msg-1251141 if you have additional questions after reviewing this, please don't hesitate to ask, Norm |
Norm Kerr |
Brilliant! - Thanks Norm... Simon |
Simon Fryer |
OK Norm - confused by the solenoid to starter lead... how does that route? (can't see it in the photos). Thanks! Simon |
Simon Fryer |
...trying to remember (I am at work now). Isn't it just a lead directly from the solenoid to the starter? (no "routing" to speak of, as it is located almost directly above the starter) can someone correct me on this? Norm |
Norm Kerr |
Simon. Quite a few things are different on LHD cars to the ones on this side of the pond, but the solenoid and starter are in the same place so I'm with Norm, the starter lead just goes straight down from the solenoid to the starter as it is directly below it. Bernie. |
b higginson |
Thanks - not sure why I found this confusing but your confirmation is very welcome. Simon |
Simon Fryer |
This thread was discussed between 28/03/2010 and 31/03/2010
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.