Welcome to our resource for MG Car Information.
|
MG Midget and Sprite Technical - coil
Hello, I am repacing may coil on my negative earth midget. the old type was SW-CB the white wire on the SW and the distributor wire on the CB. The one I have got now is + / - Do I ave to plug the white wire on + and the distributor wire on - ? Thanks a lot. laurent |
ld derancourt |
With a negative earth car the white wire (power from ignition) is connected to the +. The black/white wire (to the distributor) is connected to the -. Even if you got them the wrong way round you would probably NEVER notice the difference. :-)) |
Robert (Bob) Midget Turbo |
In your case the SW is (pos) and the CB is (Neg) Sw = Switch CB = Breaker point BUT the question You need to ask that I can not answer is... Do you need a Ballest resistor??? This one always confuses me. it has something to do with the volts and ohms of the new coil. prop |
Prop |
That one confuses you Prop? |
Robert (Bob) Midget Turbo |
LOL..."Confuses". Yep! just like that old anchient chinese philosper, religious, warlord, wise man....LOL Prop...he made some great laundry soap...Prop |
Prop |
thanks a lot. everything is OK now. laurent |
ld derancourt |
This thread was discussed between 07/06/2009 and 08/06/2009
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.