Welcome to our resource for MG Car Information.
|
MG Midget and Sprite Technical - Door hinge rebushing
Hi All, Anybody rebushed the door hinges to get rid of the slop from worn castings? If so how? Many thanks. Simon |
s page |
I used to have a Morris Minor which had worn out hinges. I drilled out and used oversize pins. Might they be available for the midget? Could be worth searching for? |
Dominic Excell |
There cheap on ebay...not hard to hobble a good set togather Prop |
Prop and the Blackhole Midget |
This thread was discussed between 19/01/2014 and 20/01/2014
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.