MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG Midget and Sprite Technical - exhaust help

Hi I am sure this has been asked before but got frustrated trying to search. Just checked my noise and off the scale at over 110! a road straight through system! so need a new silencer that works as hoping to be at Mallory for Luffield can anyone say what is best to get running a 2 inch pipe from manifold back.
HJ Cottrell

talk to Kim at Magic midget, he's helpful with free advice and does the Maniflow range.
www.magicmidget.co.uk/
David Smith

I made one out of a bit of straight pipe to an RC40 box. You need to bend it up slightly after the rear bulkhead section but I just made a few cuts in the pipe, bent it up a bit then welded them up.

Thing is by the time you've bought the box, the pipe and messed about with fitting it's probably easier to just get one from Magic Midget. I think he does a RC40 one. Mine usually gives about 99. Thats not a 2" pipe though - I seem to remember its 1 3/4.
John Payne

This thread was discussed between 10/02/2013 and 11/02/2013

MG Midget and Sprite Technical index

This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.