MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG Midget and Sprite Technical - Front Top Damper Link

Has anyone made their own top damper links, I've seen a few different ones recently some have been made by the drivers. Having priced Peter May's now at £248.00 + vat a steep rise from about £186.00 not so long ago I've declined from purchasing these.
Any ideas or drawings you could let me have?
Peter King

I've often thought about fitting those PM links and like you also thought of having a go at making some. One thing that makes me want to do my own is that the PM top link bolt arrangement doesn't seem very good to me. I had to help someone rebuild one at a race meeting once and I thought it could be done better. Not that I'm sure I could do it any better than PM!

£300 does seem a lot.
John Payne

Peter

You night want to read old threads on fitting MGB front dampers that have an extra top arm: to the front of an MG midget:

http://www.mg-cars.info/mg-midget-sprite-technical-bbs/midget-damper-options-201603312016347034.htm

http://www.mg-cars.net/mg-midget-sprite-technical-bbs/mgb-front-dampers-201603250205382379.htm

:http://www.mg-cars.net/mg-midget-sprite-technical-bbs/mgb-dampersagain-2016112420463131473.htm

Cheers
Mike
M Wood

something, perhaps, like this?

I built this and fitted it to my car about 9 years ago.

Since I fitted it, I have never had a lower threaded wishbone 'joint' wear out.

It uses front telescopics with devalved damper.


Rob Armstrong

I don't hang about either.


Rob Armstrong

Hi Rob,
Thanks for the drawing would you be able a photo of it on the car and how you've adapted the mini track rod end?
Thanks
Peter
Peter King

http://www.flickr.com/photos/34910348@N08/3234431713/in/album-72157613098281666/

this one and the next one are from when I built it. I've since added adjustable telescopics and seriously reinforced the wishbone
Rob Armstrong

hi
I vote for the mamba motorsport mgb shock conversion. If you can pick up a pair of mg shocks for the right money it is a good way to go and not expensive. Added bonus is the ability to set camber...negative if you so wish
rgds tony
tony boyle

Rob, every time you post details of your top link I think 'I must have a go at that'. Question though. What did you do for the top bolt that goes through the lot.
From the look of the hexagonal 'spacer' I would guess it's a bolt welded head-to-head with the original? otherwise I don't know why that spacer would need to be there??

I notice Mamba do a sliding camber adjustment setup for the original lever arm shocks (which I quite fancy) as well as the MGB adapters.For the cost it would make more sense to go for the MGB conversion though I guess ...
but something about a separate top link attracts me.
G Hawkins

I've used these for over 10 years, nicely produced and no issues.
https://www.petermayengineering.com/product/front-damper-top-link-kit/
David Smith

it is indeed another bolt welded on, for 2 reasons. 1), it still needs a hex on it to be able to line it up with the clamp bolt on the original damper arm.
2), the articulation of the mini tre is not massive in that plane (left to right in the flickr picture) so needed to be spaced back a bit to stop it binding.
Rob Armstrong

This thread was discussed between 02/06/2019 and 16/06/2019

MG Midget and Sprite Technical index

This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.