Welcome to our resource for MG Car Information.
|
MG Midget and Sprite Technical - Fuel Pipe Routing / Satey
I have some concerns about the routing of my fuel pipe from the pump outlet to the carb. The engine is a marina type still using the original mechanical fuel pump, it just seems a bit too close to the exhaust for comfort. I have thought about fabricating an extension to the heat shield. Opinions welcome. Thanks Ian |
I Pickering |
Ian, I think that on that style of pump you can rotate the top around so that the pipes would point forward, away from the exhaust. |
Guy W |
do away with mechanical pump and fit blanking plate; re-plumb original electric pump and route pipe per factory original. |
David Smith |
Guy thanks for that just off to try. David I don't have the original pump and fittings, I would like to go down this route but cash is a little short at the moment. Thanks Ian |
I Pickering |
This thread was discussed on 27/05/2013
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.