Welcome to our resource for MG Car Information.
|
MG Midget and Sprite Technical - Generator Connectors
Does anyone have an old wire harness that they would be willing to clip off the two spade connectors for the generator? I am converting my TD and need the 1/4" and 3/8" connectors for the newer generator. Thanks for any response. |
Jim Merz |
Jim, Try Radio Shack or your local auto parts store. Those terminals are pretty much generic and even though the replacements won't have Lucas stamped on them, the electrons won't care. Martin |
Martin |
Thanks Martin, I'll pay them a visit tomorrow. |
Jim Merz |
Jim - E-mail me if you don't have any luck at Radio Shack. I have both size of spade lugs and the protective covers for them. Cheers - Dave |
David DuBois |
Hey Jim where are you at in missouri, Im in Jefferson city, I have those terminals ...77.382% sure anyway...But its going to be several weeks before I caan get at them...in a box blocked by midget with engine hanging out on a cane in front of midget. prop |
Prop |
This thread was discussed between 10/10/2008 and 11/10/2008
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.