Welcome to our resource for MG Car Information.
|
MG Midget and Sprite Technical - Hardtop bracket
Hi does anyone have a photo please of the fitting thats missing on my midget MK11 hardtop?(see picture) It has obviously pulled out at some point, but before I think about trying to fibreglass in the captive nuts I would like to know what attaches to it. Its tempting not to fit anything as my MK111 didn't have any fittings to the rear deck Mike |
m fairclough |
It's basically just a bent bracket which slots under the tear-drop. The mk3 doesn't have anything there as there is nothing on the shell to attach to. |
Dave O'Neill2 |
This is what the originals looked like.
|
PN Sellen |
Many thanks for the replies and image it looks simple enough Mike |
m fairclough |
This thread was discussed between 23/03/2013 and 25/03/2013
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.