Welcome to our resource for MG Car Information.
|
MG Midget and Sprite Technical - Help with wiring!!
Hi, Installing a good secondhand loom in my 67 mk 111 midget,(took out old loom over 3 years ago) i cant for the life of me remember where the wiring to the headlights and the front sidelights and flashers ran at the front of the car, feel really stupid have tried various routes but none look right, all the rest of car is fully wired up(except dash)Any help really appreciated, a pic to framemartin@hotmail.com would be brilliant. Cheers Martin. |
m a frame |
mine goes down the drivers side inner wing, through the splash guard thing & the valance via a rubber grommet then into the gap behind the front grille. Then it splits into a million separate bits from there behind the grille. the splits for the left and right hand side lights come from behind the grille, back out through the sides of the valance into the lights. does that help you? mines a '72 mk3 |
Rob Armstrong |
Martin I think you maybe asking about the front harness. I think you are refering to the loom that goes across the front of the car just behind the top of the grill and clipped under the slam panel. |
Robert (Bob) Midget Turbo |
Martin, is this any help? I'm afraid that this is showing everything except for the bit you need, but this is as far as I've gotten... Norm |
Norm Kerr |
This thread was discussed between 05/05/2011 and 06/05/2011
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.