Welcome to our resource for MG Car Information.
|
MG Midget and Sprite Technical - Midget loom
Guys, apologies as i have posted a thread similar to this before but need some more information. I am restoring a 72 midget and wanted to change to alternator, i had decided to get the later loom for alternator and use that as old loom is shot anyway. I am fine with the logic of this but much prefer the toggle switch type dash and wondered if i could just swap, are no of switches the same . One obstacle i can see is new loom will be wired for ignition on sterring colum and old toggle dash will be ignition in dash I was planning to buy loom with no hazard lights if that helps. thanks andy |
a chaffey |
You can just bend that bit up in to the dash. It might be a bit short because part is combined with the indicator wiring but that would just mean adding small bits (cut the right colour off the old loom) |
Onno Könemann |
With that in mind Andy I think I would either sort out my existing loom (In fact I personally would always do that) or I would buy the correct loom for my car and do a simple Alternator conversion. It really is a simple thing to do and is far easier that modifying a new loom to suit yor car and your switches. See here http://is.gd/ffxaA |
Robert (Bob) Midget Turbo |
If you buy a new loom from Autosparks, they will alter any of it to suit your requirements. |
Dave O'Neill 2 |
Do you have a link or address for Autosparks Dave? Graeme |
graeme jackson |
http://www.autosparks.co.uk/ I had them make me a loom for the racer, with lots of additions and deletions. |
Dave O'Neill 2 |
Hm, When ordering at Autosparks(US GAN6) you have to pick from 3 options: 1 Dash harness( I remember the dashloom was seperat and had to be connected to the mainwiring. 2 main harness i guess thats the remaining wiring mainloom? 3 body harness, what is this if the main harness isnt the mainloom? Trying to remember from my midgetrestauration i 1997 i cant remember the wiring being in 3 parts: dash, main and body... i thought just dash and main. So in short: what is the main harness and what the body harness? |
Arie de Best |
Arie, Main loom is the part under the bonnet and stratching to engine, fuses etc. Body loom is the one wich runs trough the left side to the back lights, reverse lights, etc. Me thinks :^P |
Alex G Matla |
This thread was discussed between 17/09/2010 and 25/09/2010
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.