Welcome to our resource for MG Car Information.
MG Midget and Sprite Technical - Mk 3 midget hood frame
Any chance someone could post a pic of the erected hood frame on a MK3 midget (from inside or outside if roof not fitted)? The piece I need to see is the first rail after the header rail, it appears mine has been welded sideways but I want to be sure before I start cutting pieces of metal.
Thanks in advance.
Just going away to France for a week but will take what pics you need upon our return if still required.
However, I would like to ask you a question or two and wonder if you could mail me off board....
Thanks in advance,
|M T Boldry|
|Chris, I have a photo of my frame erected without the hood in place on flicker http://www.flickr.com/photos/28194759@N08/sets/72157605953004040/l as part of my frame repair section. Hope this gives you what you need.
That is what I needed, Looks like mine has been welded wrong
This thread was discussed between 12/08/2009 and 13/08/2009
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.