MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG Midget and Sprite Technical - Number plate wedges

My midget lacks the little wedges that are supposed to be behind the number plate. Result is that the plate points up slightly. I'm not that much of a stickler but I'm getting bored of people telling me it's wrong.

Unfortunately, the wedges is not stocked by suppliers that I know.

I'm sure I could bodge something up but it would be nice to find the right bits, or a proven equivalent.

Does anyone know where I can get the wedges, or of an equivalent that is easily obtained and does the job?
Pete AC

I might have some lurking in the garage, somewhere.

daveo138 at yahoo co uk
Dave O'Neill 2

Dave O, I have hopefully sent you a mail. Do post back here if it hasn't arrived. Thanks.
Pete AC

If Dave doesn't have any spare, you can use AHA9460X which are the spacers, bumper to spring bar (in Moss speak). With a bit of fiddling (fitting backwards in effect) they do the job.
I can post a picture tomorrow if that will help?
Jeremy Tickle

Pete, I have some spare, email

mgsmithy on yahoo dotcodotuk


David Smith

Pete

I haven't had a chance to look, today, but David seems to have more than I do.
Dave O'Neill 2

Received and fitted. Number plate now correctly perpendicular to the ground.

I shall hopefully now be immune from comments about my wonky number plate, at shows.

Thanks, David S

P
Pete AC

This thread was discussed between 13/07/2015 and 15/07/2015

MG Midget and Sprite Technical index

This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.