Welcome to our resource for MG Car Information.
|
MG Midget and Sprite Technical - Quick wiring question
I am just tidying up the wiring on the midget. I am running some 17 amp cable to the headlights (17 amp each for dip and main), and 2 more again for the spotlights (in case I want to run 4). As I have an F/G front end I have to run earths back to a suitable point. Question is, do I have to run similar size & quantity of earth cables to what I have used for the supply? Thanks Matt |
Tarquin |
I think you do Matt, or you won't get the full current flow through the lamps. |
Guy |
As only high or low beam will be on at the same time for the headlights you only need one earth return for each headlight. 17 amps at 12 volts = 200 watts so should be plenty big enough for one light. |
Greg H |
er, doesn't the headlight flasher have the main beam and dip on together so four lights/filiments(?) |
Nigel Atkins |
It does, but 17 amp earth from each light will be more than enough for both filaments on at the same time. And for times when Matt fancies a quick flash (I know what he is like!) a single 17 amp earth would be OK for both headlights X both beams. |
Guy |
Er, well I am running 120/85 halogens in my headlights :-/ cracking long range illumination tho. That is a smidge over 17a in total per headlight when both are on, so I will uprate the single earth that comes with the headlight units to 17a, and run a single earth for each side. I thought that was the case but just wanted to check. |
Tarquin |
He he! I used those for a while - I think mine were 120/55 but the plastic/ nylon plug in attachment for the bulbs melted and the bulbs fell out! |
Guy |
This thread was discussed on 03/01/2012
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.