Welcome to our resource for MG Car Information.
|
MG Midget and Sprite Technical - re building
just got it back from spray now the work can begin not sure where to start, engine and box in so what to do next?
|
mark heyworth |
Loom and brake pipes. |
GuyW |
forgot to add loom brakes and clutch done sprayed engine bay and underside first and did most of the engine bay just oil cooler and rad to fit.
|
mark heyworth |
In that case I would add the rocker cover, with oil filler cap, and the carbs - or blanking plate, before dirt or something worse gets into the engine! Seriously though, wiper mechanism, washer jets, dashboard air air vents, windscreen and then dashboard, in that order. Pre-instal gauges in the dash or even wire it with a plug-in sub-loom for the instruments as I did. |
GuyW |
Looking good Mark. |
Bill Bretherton |
Nice project Mark, well done on the fusebox upgrade! Take Guy's advice and working order. Just make sure you end working on the midget with adding some nice/shiny (rearlights and so). Easy job and putting the shiny bits back on the car is so rewarding!!! |
A de Best |
Definitely screen air vents before windscreen. DAMHIK! |
Bill Bretherton |
Put that scratty orange fan through the dishwasher ;-) It's gonna be a great looking car. Nice one! Malc. |
Malcolm |
And the heater if you get it done before warm weather arrives. Need it in this bloody weather. 5 straight days of frost down south. Brrrrr. Looks spanking. |
anamnesis |
anamnesis its still 4 degrees up north which is tropical to us northerners |
mark heyworth |
Mark. We're still in negative figures in the real 'up north'. |
graeme jackson |
I don't mind the roof off at 4 degrees with the sun out, and a sheepskin flying jacket on. But I still want the heater on my tootsies. We're a tough lot down south. Lol. |
anamnesis |
This thread was discussed between 14/01/2022 and 20/01/2022
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.