Welcome to our resource for MG Car Information.
MG Midget and Sprite Technical - rear end and trans question
I did a rebuild on my 71 mg midget 1275. I had to pull the eng because I did not resplace the core plugs in the back and they were leaking. Got the eng back in but now when I put the trans in gear I try to turn the engine using the back wheel. However the wheel just turns freely. The drive shaft will not turn until I put the trans in neutral. I am perplexed by this. I used the back wheel to turn the eng before to get to top dead center. I hope this discribes the situaltion clearly. |
Ken Bargeron |
Never mind, it was a dumb question. I have both back wheels off the ground... d'oh! |
Ken Bargeron |
He he... happens to the best of us, Ken. Cheers, -:G:- |
Gryf Ketcherside |
This thread was discussed on 31/05/2008
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.