Welcome to our resource for MG Car Information.
MG Midget and Sprite Technical - rear spring leaf width
I am wondering if poly rear spring pads from a midget will fit my TD, Moss does not offer them for a TD. I would like to know the spring width, length of the spring pads & center bolt pin diameter, thanks Len |
Len Fanelli |
As Moss Europe lists them under the Moss USA part number of 280-630 I think you will find that they are available from Moss USA. If not, order them from Moss in the UK. If they really are not available, you will probably fine the MGA ones a closer fit. |
dominic clancy |
I recently fitted a set that I bought from Peter May. Give him a call as he will probably know whether the Spridget ones will fit your TD. http://www.petermayengineering.co.uk/ |
Colin Mee |
Thanks, the poly # from moss Europe is ACA5138SPK . not listed in Moss USA, I will call them today. |
Len Fanelli |
I've just checked the spring pads for Midget and MGB banjo type. The centre pin is 5/8" on both. Other dimensions below. |
Dave O'Neill 2 |
This thread was discussed between 31/05/2015 and 01/06/2015
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.