MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG Midget and Sprite Technical - Source new calliper pistons?

As the topic states.. were can I source god priced and quality calliper pistons and is there anything special to keep in mind with after market pistons?

Thanks
Alex
Alexander Sorby Wigstrom

I don't think so. The old ones were plated, the new ones tend to be stainless.

I bought 2 NOS ones on ebay when I rebuilt my brakes. But unless you find a good deal they are actually surprisingly expensive. Add that to the small amount the seals costs and you may aswell buy a new caliper, you can get new callipers on ebay for about £30 each.
C L Carter

i should have NOS original BMC (still in the original boxes and in perfect condition) laying around somewere
awe rijt

The pistons are the same as Mini 8.4" calipers.
Dave O'Neill2

These guys have been helpfull in the past

Classicar Automotive

Old & New Brakes
Unit A
Alderley Road
CHELFORD, Macclesfield,  Cheshire   SK11 9AP
United Kingdom
Phone: + 44 (0) 1625 860910
Fax: + 44 (0) 1625 860925
email us


Engineering company in the UK specialising in British, European and Japanese classic and sportscar braking systems.

Including AKE , ATE , BENDIX , DUNLOP, GIRLING , LEINZ-DUNLOP , LOCKHEED,
SUMITOMO.

Our range of remanufactured products cover,
Brake calipers
master cylinders
Piston and cylinder assemblies
Servo assemblies hydraulic
Servo assemblies mechanical


Cast iron and stainless steel bore lining undertaken. Every item being tested and Guaranteed.

Our new products range covers,
Brake discs
Brake pads
Caliper pistons
Caliper seal kits
Master cylinders
Servo assemblies
Servo seal kits
Mechanical handbrake parts

Individual Quotations and Prices are available by Fax, E mail or Phone.

We offer a World Wide Mail Order service and accept all major credit/charge cards.
d cusworth

You can anodised aluminium caliper pistons for all minis from JONSPEED, so they should have them, for as Dave says they are the same as 8.4" mini calipers. They would save some unsprung weight. I use the Jonspeed ones in some Metro calipers on my car.
Ian
Ian Webb '73 GAN5

I bought two complete calipers for midget from MGBHive for less than pistons and seals. Much easier.
G Burrow

David Manners Group (in the Midlands) sell caliper pistons - 114713 for £6.90, or stainless steel 114713X for £11.70. Personally, I'd be inclined not to fit replacement whole calipers (I won't mention Chinese imports).
Andy Hock

I got mine from minispares. SS ones - dad's had them on his mini for about 15 years and still perfect.
Rob Armstrong

I bought a pair from Moss and VBL. The moss ones went back... The Chinese casting quality was not as good as the VBL units. Would love to have been able to get my hands on a NOS set, though.
Sheldon's 74

Point about SS vs aluminum pistons, assuming they are correctly finished. SS is a very poor transmitter of heat, and aluminum is excellent, with steel in between. So hard usage with SS is less likely to boil the fluid. Yes, I have.

FRM
FR Millmore

This thread was discussed between 28/06/2012 and 16/07/2012

MG Midget and Sprite Technical index

This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.