Welcome to our resource for MG Car Information.
|
MG Midget and Sprite Technical - Spark plug advice
Hi all, Having ragged my midget yesterday,once home, I took out the plugs whilst attending to various other post run items. 3 of my plugs look fine whilst that in 4 is a bit oily- car ran like a swiss watch so not sure If I have the abdabs for no reason- I thought if I had set the carbs wonky BOTH 3 & 4 plugs would be oily? Any advice very gratefully received. Cheers colin |
colin frowen |
Valve stem seal passing a bit? |
Mark O |
Hi Mark Thanks- I didnt think of that! I will check this weekend. cheers colin |
colin frowen |
Colin, which engine/ Not that it make much difference to the following... Start of HGF between oil and chamber... Compression check and keep an eye on it for now. Best of..... MGmike |
M McAndrew |
COULd just by the run of the worn rings...do you have much blow by...but worn valve guild seal makes alot of sence Id stick a vac gauge onthe intake and see what it says |
Prop and the Blackhole Midget |
This thread was discussed on 29/10/2012
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.