Welcome to our resource for MG Car Information.
|
MG Midget and Sprite Technical - Tining cover
Anyone have a good 1275 timing cover? |
Richard Perry |
Richard, you may be after "original" but an alternative is one from a classic mini, which has the advantage of having the timing marks on the top, where you can see them! All you then need to do is remark the crank pulley. |
GuyW |
many thanks but I need the midget one with the chimney for breathing so don't think they do that one |
Richard Perry |
Plus add a catch tank for the oil mist I though i had a leaking timing cover, took along time, to figure out, but it was a warped front engine plate was warpped really bad... thing leaked oil like a sieve untill i figured it out |
1 Paper |
Might have one, will check at the weekend for you. |
P Bentley |
http://www.ebay.co.uk/itm/MG-MIDGET-1275-TIMING-COVER-/232281847604?hash=item361513b734:g:jvIAAOSwax5Y1T4N Bit rusty, but do-able. Bernie. |
b higginson |
Richard, I have a timing cover, I should have grabbed a picture, but it doesn't have any timing 'teeth' on it. . . not sure why, it was in a bag of other long forgotten about bits. . . .let me know if this is any use to you |
P Bentley |
it doesn't matter if no timing teeth - can you email a pic to frogeye3@hotmail.co.uk many thanks Richard |
Richard Perry |
This thread was discussed between 22/06/2017 and 28/06/2017
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.