Welcome to our resource for MG Car Information.
|
MG Midget and Sprite Technical - uprated original air filter for 1500
OK the bling air filters (posted a while back) I constructed for the show and shines look great but actually reduce HP at operating temp because of the hot air being ingested. Hmmm, what about increasing the diameter of the standard cold air tubes by 50% OK see attached pic, Dia now 50mm ID Keep you posted as to results Cheers PS silver grey powder coat looks fabulous only cost $50 All Rod |
R W Bowers |
Interesting.... id also consider making a heat shild similar to the 1275 P |
Prop and the Blackhole Midget |
Looks really, really good Rod. My 1500 came sans original casing and some dire bodgework to some old pancake filters. I've hummed and procrastinated over the design of the replacement but have eventually decided to make an insulated air-box (double-skinned with insulation between) with a 60mm diameter inlet to a remote filter. Inside the box will be stubby or short ram pipes. |
N.C. Nakorn |
This thread was discussed between 27/05/2014 and 02/06/2014
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.