Welcome to our resource for MG Car Information.
|
MG Midget and Sprite Technical - Voltage digital readout
I have never been satisfied with an inaccurate analogue voltmeter. So not willing to bore holes in the instrument panel of the Frog, dropped the electrical box down next to the firewall using 2, 6" straps bolted from the lip of the panel. So now I can tell if the dynamo is charging and a low btry condx exists. May not be from the purist but can be disconnect easily. Gary, N.C. |
GT coffey |
each to their own, I'd sooner have a good battery and dynamo (alternator) and not worry about it if I had that I'd think it was midday all the time |
Nigel Atkins |
Strictly speaking, a digital readout is not necessarily more accurate than digital. It is just that it gives a reading which being numeric one is deceived into thinking that it is! |
Guy W |
Sorry, I forgot to proof read after posting! Try again: Strictly speaking, a digital readout is not necessarily more accurate than analogue. It is just that digital gives a reading which being numeric one is deceived into thinking that it is! |
Guy W |
Gt, Thats one possiable direction....but maybe there is an alt. Like say this one... http://db.tt/O2ew1wDL Prop |
Prop and the Blackhole Midget |
When all else fails, try insanity? |
Growler |
This thread was discussed between 27/05/2013 and 29/05/2013
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.