MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG Midget and Sprite Technical - Where to remove engine

OK, I have a wee problem with our UK domiciled midget ... the cam lobes appear to be badly worn and the compression on no 2 is well down. :-(
Bad enough at any time, but it is in London in the care of son Matt who has no facilities (though at least he has a park in the basement of his apartment), and I am at home in NZ for the foreseable future.

Peter Burgess is happy to attend to the work but can't do the remove and refit.

Any suggestions on who/where to remove the engine are welcome!
Paul Walbran

Matt tells me he thinks there is room in his basment garage, so does anyone know where to a hire engine crane?
He's in Golder's Green.
Paul Walbran

Paul, Matt

I have an engine crane you are welcome to borrow anytime. I am about an hour north of Matt, happy to meet him halfway somewhere and pass over the crane, or at Christmas I could bring it down to him in GGreen and help him lift out the engine then take the crane back or leave it with him of the engine will go back in soon.
Ian
Ian Webb 1973 GAN5

It is a long time since I have used a crane to remove an engine from a Midget, but I seem to recall I needed quite a bit of headroom. Is Matt sure the basement is high enough? (Reminds me of the old adage 'measure twice, cut once.')
Jonathan Severn

you can buy a new crane on e bay for £110 delivered - then sell it on after at half the price and it will be cheaper than hiring - which you'll need to do twice
S G Macfarlane

or buy a secondhand one on ebay and sell after for a small profit like i did usually a few on there.
mark heyworth

Thanks all, usual very helpful BBS response :-)
Ian, I'll email.
Paul Walbran

Hi,
I have a crane and engine stand you can borrow if they are still needed. I am in Hertfordshire a little closer than Northants.
Happy to help remove the engine if I have time, too.
Dave
Dave Brown

10 x20 storage building makes a great shop
Prop and the Blackhole Midget

Ian/Dave
Thanks for the very generous offers of help. There's no panic on the job, and Matt is currently trying to sort out when he'll be free enough from work etc to tackle it. We'll be in touch.
Cheers
Paul
Paul Walbran

This thread was discussed between 22/11/2016 and 28/11/2016

MG Midget and Sprite Technical index

This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.