Welcome to our resource for MG Car Information.
|
MG Midget and Sprite Technical - windscreen help
hey all is there anyone on here thats near to redditch worcs that can help me ? im stuck!!! nearly ready to fire the car up for the first time , but want to get the dash in and wired in but first i need to fit the windscreen which I'm finding it impossible to do it has a new rubber seal which i know are notorious to fit but no matter how i try i can't get it down enough to fit the bolts is there anyone near redditch that knows how to do this than can spare a little time to help me ? am at a halt point now and only have october to get it finished and motd before it goes to the nec cheers in advance rich |
richard weaver |
Rich, have a look in the Archives for Guy's strap method |
Nigel Atkins |
Richard, A couple of ideas, here, including Guy's ratchet strap wheeze. http://www.mg-cars.net/mg-midget-sprite-technical-bbs/windshield-to-body-seal-2013022715454818414.htm |
Andy Hock |
More detail about Guy's 'ratchet strap' method: http://www2.mg-cars.org.uk/cgi-bin/gen5?runprog=mgbbs&access=&mode=archiveth&subject=97&subjectar=97&thread=2011053010052310083 |
Andy Hock |
This thread was discussed on 17/09/2014
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.