Welcome to our resource for MG Car Information.
|
MG Midget and Sprite Technical - wiring for courtesy light...
first of many dumb questions as i complete the wiring clean up of my '73 midget: what wires are supposed to go to the switch in the driver's door? the harness has an offshoot for it which have the wire for the buzzer (which i think is purple/green... but i'm at work and it is at home) and a solid purple wire. is the purple wire to the courtesy light? is there supposed to be a purple/white wire for the courtesy light? that is more consistant with what I remember... I am using an aftermarket switch because the original fell apart in my hands when i tried to make it work. the new switch has a single female bullet connection, so I know i will have to make an apaptor to fit it to the two spade connectors from the harness and possibly a bullet for the purple/white wire if it turns out i need one. (I cannot find what i did with the original switch to double check how it was connected) is that confusing enough? thanks for help! Chris |
Chris Edwards |
I don't know about the buzzer...we don't have them on this side of the pond. UK wiring is:- Purple - live feed to the light. Black - ground, so the light can be turned on with the switch Purple/white - to the door switch |
Dave O'Neill 2 |
This thread was discussed on 15/11/2010
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.