Welcome to our resource for MG Car Information.
|
MG Midget and Sprite Technical - wish bone woes
I have fitted blue bushes to my front suspension( from magic midget) but had a real struggle to get them back on the car. i had to fit two new pivot bolts as one of the old ones was bent! The bush is turning in the wish bone!!any ideas regards Pete |
P C Knightley |
the inner bushes don't have steel centres do they; the pivot bolts can't be overtightened as the special washer butts against the shoulder on the bolt. Use a light coating of silicone grease on the pivots, leave everything loose until the car is sitting on its wheels and has settled overnight, then tighten up. |
David Smith |
This thread was discussed on 02/04/2012
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.