Welcome to our resource for MG Car Information.
|
MG MGA - Adjustable Steering Shaft
Is it easily possible to remove the small shaft from the large one? I have a nice column but the steering wheel splines are stripped. I have an old one from a wreck I would like to swap out. If not I will clean up the rusty one..thanks. |
David Terhune |
Yes, but soak in penetrating oil first as otherwise it may not move at all! The small (inner) shaft should slide / press out from the tubular main shaft. The main shaft fits inside the steering tube that is clamped to the chassis under the dash and by the pedals. I can also recommend the plastic steering column bushings that were available on this board - no more felt issues. |
dominic clancy |
If you mean removing the short sliding section from the main column, there is a key that must be removed. As I recall you will have to separate the shaft at the universal joint and remove the upper assembly to get at it. |
John DeWolf |
This thread was discussed on 24/07/2006
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.