Welcome to our resource for MG Car Information.
|
MG MGA - another front end question
Hi, I stripped off the front end yesterday and also the rear. Having read a lot of threads, and having the engine already removed, I was concerned about the spring. I tried a rope/chain trolley jack method, and when I would try and compress the spring, the top trunnion bolt would only get harder to slide. I then removed the chain, and just slid the bolt out. There was no pressure being exerted by the spring. Had the sme on the othe rside of the car. I measured the spring and it is 9" long. Are my springs bad? Jonathan |
jonathan eagle |
Jonathan, Free height for cars up to no. 15151 is 9.28" and the free height for all others is 8.88" both within 1/16". What is the condition of the rubber rebound buffers? Have a good day! John |
John Progess |
John, The rubber bumbers were severely damaged. So actually they were slightly less than 9", so they sound right. What will the condition of the bumpers indicate? Jonathan |
jonathan eagle |
This thread was discussed on 20/01/2008
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.