Welcome to our resource for MG Car Information.
|
MG MGA - AP Caparo M/C
Hi All I have read all the threads regarding binding front discs and it seems that the M/C I fitted a few years ago was a TRW. Trying to find a replacement AP Caparo m/c. Can anyone point me in the direction of a supplier in the UK. Thanks Brian |
Brian Paddon |
I'm not sure which makes, with all the changes of ownership, but I have these in my bookmarks. IIRC Mike (MGB) always recommends these guys - http://www.pastparts.co.uk/index.php?route=product/category&path=68_272 and/or(?) these - https://www.powertrackbrakes.co.uk/ And there's these - http://www.coastings.co.uk/ HTH. |
Nigel Atkins |
The last one I bought came from David Manners, one before that from Moss |
Dominic Clancy |
I got mine from Bob West. Steve |
Steve Gyles |
Brian I did try to pm you - not sure if i sent it correctly. But like Steve, I bought mine from Bob West too Graham |
Graham V |
Thanks to you all. I have contacted Bob West and will order a Caparo tomorrow. Brian |
Brian Paddon |
Hi All Got a new AP Caparo from Bob West and fitted. Brakes not binding now. Great. Only problem now is getting a good clutch. Tried for 2 days but not fully working as should. Not sure whether to bleed or try reverse pumping again. Any quick fix ideas would be appreciated. Brian |
Brian Paddon |
Brian Good news about the brakes. I assume you are getting fluid down and through the clutch slave, and it’s just a case of expelling unwelcome air. Is it a new slave cylinder? To fit in the box, the bleed nipple is sometimes temporarily fitted at the end, rather than the side. Assuming that’s all ok, I found this helpful www.youtube.com/watch?v=uj1dMdYgRK4 |
Graham V |
That's a good simple video, I've not seen it before. Graham, usually following the hyperlink address with carriage return (to get your cursor on the line below it) will make the address a live direct hyperlink. Thus: www.youtube.com/watch?v=uj1dMdYgRK4 Many apologies that didn't work, wonder why. Doh! of course, doh! https: // bit was missing, and I missed that. Try again, pretend you didn't see my previous bit. https://www.youtube.com/watch?v=uj1dMdYgRK4 |
Nigel Atkins |
Hi I bought an AP Caparo one from Powertrack Ltd, https://www.powertrackbrakes.co.uk/ worth noting AP Caparo is now ‘920 engineering’ so if recently made this is what a genuine Lockheed one will be labelled as, if a few years old ‘AP Caparo’. Might want to buy and fit an AP Caparo/920 Engineering slave cylinder at the same time. And try Powertrack for one too. Best wishes Mike |
M Wood |
Hi Mike Thanks for your information. I will make a record for future use. I have fitted a new m/c and bled the clutch with an ezibleed kit. So back on the road again Covid permitting. Brian |
Brian Paddon |
This thread was discussed between 01/04/2021 and 10/05/2021
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.