Welcome to our resource for MG Car Information.
MG MGA - brake and clutch pedal
where does the return spring for the brake and clutch pedal go to.
one side is on the brake/clutch pedal and the other do they go to the hole in the support brackets for the master cylinder.
or does there go a bolt through the 2 holes in the support brakets and are the springs then attached to the bold.
|On mine, the springs just go through the holes in the bracket and the way the ends of the springs are formed it looks like that is the way they are supposed to be.|
|Through the holes in the sides of the bracket.|
JIM in NH
|Does this help?
This thread was discussed between 05/07/2011 and 06/07/2011
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.