Welcome to our resource for MG Car Information.
|
MG MGA - Brake Noise
I'm getting a sharp click type of noise from the front suspension area when I gently brake and if I take my foot off the brake and reapply it happens again. Could this be the brake pads rocking slightly in their calipers since there is a small amount of slack when installing them? |
J H Cole |
This is a definite possibility. Brake pads should be a tight fit in the calliper without any side movement. |
Iain MacKintosh |
Click might be brake pads. Clunk might be worn rubber bushings at the lower A-arm inner pivot jointsm or loose bolts in the A-arm side brackets. Either will clunk when you apply brakes, and clunk again after stop and release. |
Barney Gaylord |
Also check to make sure wire wheels are on snug with no play. |
Steven B |
This thread was discussed on 31/07/2007
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.