Welcome to our resource for MG Car Information.
MG MGA - brake rebuild kit
|i am rebuilding the hydaulics on my mgmk2 and ordered the kits from moss. the front caliper kits are lockheed which is ok but the rear rebuild kits are from TAIWAN. has anyone had any experience with these seals|
are they ok or are they tipical of some of moss' other rubber (very short life span)
I have had aftermarket rear brake cylinders installed since 2006. No issues with the brake cylinders, but have had to replace the handbrake boots. The Moss supplied replacements seems to be holding up fine.
|tks for your comment jjb but i think i have answered my own question..when i installed the m/c kit from moss the outer seals that go over the piston were slightly too large and prevented the springs from returning the pistons to rest reliably so i had to stay with the old seals which work fine for now|
This thread was discussed between 23/04/2011 and 01/05/2011
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.