Welcome to our resource for MG Car Information.
|
MG MGA - Exhaust manifold stud threads
I have what I believe is a common problem..the three exhaust manifold studs (exhaust pipe connection end) are very loose, caused by corrosion. Is there any way to firm these up, such as a helicoil or similar? |
Gary Lock |
I have replaced all three of mine with bolts. |
dominic clancy |
Yes, you can drill out the threads (keep it straight)and install Helicoils, then install new studs. No need to fiddle with loose bolts and nuts. |
Barney Gaylord |
This thread was discussed on 12/04/2007
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.