Welcome to our resource for MG Car Information.
|
MG MGA - Fan belt
Does anyone know the exact length of the replacement fan belt on an MGA 1500? I tried a 35 inch and it was too small. Many thanks, Bill Chandler Ann Arbor, Michigan |
W Chandler |
My spare is 36.5".....................mike |
Mike Moore |
I think it is NAPA 09033, which is 36-1/4" for the standard generator. That would be 920-mm (92-cm). If you get it a little too short you may have to dismount the generator to get the belt on. This is s little tricky though, because there were two different generator pulleys for pushrod engines, and two different pulleys for Twin Cam engines, making (I think) four different belt lengths that were standard. There is an CSM on this: http://MGAguru.com/mgtech/care/csm/mg205.pdf |
barneymg |
This thread was discussed on 23/07/2017
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.