MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGA - Laygear circlips

Does anyone have a trick, tool, or method for removing the circlips from the MGA gearbox laygear?

I know the needle bearings must frequently be replaced but the factory installed the needle bearing circlips like they are never going to be removed.
H Speer

Yes. The only reason for removing the clips is to replace the bearings, so we presume the old bearings will not be re-used. Place a small punch against the clip half way around from the tips, and give it a whack with a hammer to break the clip.
Barney Gaylord

Thanks Barney. I had spent half-hour trying to pry the damn things out with no success. Three hammer blows by your method and they were out in 5 min.
The needle bearings were falling out all over the gearbox as soon as the layshaft was pulled out. So, I assumed they needed replacing along with the layshaft.

MERRY CHRISTMAS!
H Speer

I asked the same question, got the same answer, and used the same method....from Barney, of course!

It only took one whack for me.
Tom Baker

Why should Barney offer three-fold more effective advice to Tom than to Henry?
Ken Korey

Maybe Tom has a bigger hammer.
J Heisenfeldt

It's not the size but how you swing it. Or something like that.....
Tom Baker

This thread was discussed between 17/12/2008 and 19/12/2008

MG MGA index

This thread is from the archive. The Live MG MGA BBS is active now.