Welcome to our resource for MG Car Information.
|
MG MGA - M/C connections
I see in the Moss catalogue that the clutch line connects at the MC via a banjo and adapter, but the brake connection is direct. What is the reason for the difference? |
Art Pearse |
The clutch line is 1/4" diameter compared to the 3/16" of the brake line. I found bending the clutch line up from the heater shelf, even with Cu-Ni, quite hard work. To have to bend it another 90 deg. and in steel would have been quite a challenge! Plus moving the nut along curved tubing is also difficult if not impossible. They should have done the brake line in a similar way to raise the height of the nut to make it easier to undo................................Mike |
m.j. moore |
This thread was discussed on 18/04/2013
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.