MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGA - Machining rear plate for oil seal

Obviously prices will vary from place to place, but in general terms, how much should I expect to pay to have an MGA rear engine plate machined to accept the oil seal for a 5 main bearing engine?
Andy Bounsall

Ballpark, $50-$100. YMMV. Maybe a 6-pack if you can find a friend with a milling machine.
Barney Gaylord

Cost me $25 and some sake. Guy wanted to do it for free but it just didn't feel right. Cost more to ship it here. I had him tap the holes as well because I am the world's worst measurer/cutter/driller.
Tom Baker

This thread was discussed between 03/09/2008 and 04/09/2008

MG MGA index

This thread is from the archive. The Live MG MGA BBS is active now.