Welcome to our resource for MG Car Information.
|
MG MGA - MC Pushrod Colour
Currently doing a master cylinder overhaul (see Braking Issue thread). Should the push rods and fork ends be painted or bare metal? Steve |
Steve Gyles |
Mine were bare metal when I got my A in 69 if that helps. Paul |
P M Dean |
Steve, Mine were bare, but i sprayed them smooth matt silver. regards Colin |
Colin Manley |
Mine were bare steel ,which I wire wheeled to polish. I gave them a quick coat of clear to keep from rusting. I did not put clear on the rod that goes into the M/C, just cleared to the rubber dust seal. |
CR Tyrell |
This thread was discussed between 16/04/2014 and 17/04/2014
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.