MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGA - MGA brackets for brake master cylinder

Hi one and all,
i am new to this and my first posting may not make any sense. I have purchased a 58 A which has been converted over to the MGB brake and clutch cylinders. I would like to go back to the OE spec. Does anybody have the correct brackets that i could purchase or are they being re- manufactured? i hope some one can help here.
thanks
A Davis

Is this what you want?

No connection, just saw it recently.
http://www.ebay.co.uk/itm/360724045157?clk_rvr_id=652547266285

Regards,
Mark
M Wellard

not quite. the actual brackets which hold the mater cylinder then mounts to the pedals. bolts to the bulkhead/firewall then to the top of where the heater sits
A Davis

Off topic, but where in Bedfordshire are you located? i'm in Clophill.

John Bray

I think it's the master cylinder box you're after, part number AHH5947. I don't think Moss do them but it is in Scarborough Faire's catalogue so they may have one new or second hand.
There is one on US Ebay right now (item no. 371053990335 ) but it's being sold with a master cylinder and the postage would probably be horrendous.
I would suggest an e-mail to Cecelia to see if she has one.

If they hadn't been thick steel you might have been able to make one but I think they are made from 16 gauge sheet........................mike
m.j. moore

John Bray sorry for the delay i am in Luton work in Barton
A Davis

This thread was discussed between 18/06/2014 and 21/06/2014

MG MGA index

This thread is from the archive. The Live MG MGA BBS is active now.