Welcome to our resource for MG Car Information.
|
MG MGA - MGB tach
I have a 5 main B engine in my A and I have the 67 tach installed in the dash. How do I wire it up so it works? |
GK George |
First - is the tach the right polarity for your car? It will say positive or negative ground on the face plate. Assuming you have a negative ground car, and the tach is neg ground, then you need a wire from the +ve side of the coil to the loop on the back and then on to the ignition (ie the other side of the loop). You also need a green wire to the spade terminal on the back of the unit, and of course ground through the bracket, or on a black wire to the bracket. If you tach does not match the polarity of the car, you will have to convert it. This is detailed on www.mgaguru.com. Peter. P.S. I take no responsibility for the above information. Check out '67 MGB wiring diagram to confirm yourself. |
P. Tilbury |
This thread was discussed on 02/08/2013
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.