Welcome to our resource for MG Car Information.
|
MG MGA - MGF Brake Master Cyl Service Tool
I wish to reseal my MGF Brake master cylinder. I have it partially stripped but to remove the second piston, I need to remove a 5 sided ( pentagon ) plug which holds the locating pin. Where do I get the neccessary pentagon socket bit. Its about 5mm and the only one I have found is 10mm which is far too big. Any help or advice would be appreciated. |
R J Wilkinson |
Try the MGF Technical forum, you may have better luck! |
N McGurk |
This thread was discussed on 20/03/2012
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.