MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGA - Nylon Wind Blocker

I just saw a wind blocker on a MGB, made of black nylon mesh, much lighter and better looking than plexiglass. Has anyone seen one for an A? thanks, Tyler
C.T. Irwin

If you can upload a picture maybe that 'ill help.

Frank
F Camilleri

Easy to make. You could do it yourself for a lot less than $250.00+ (MGB price).

JIM
AJ Mail

Well, here it is, but only for a MGB. Too bad, it has all the bells & whistles.

Tyler

Wind Blocker For MG MGB WindScreen
Free Ground Shipping within the USA
Avalibility: In stock
Fits:
MG MGB
Benefits:

The Windblokker® has a frame manufactured from aircraft aluminum, with a nylon mesh center. The flat black finish of the Windblokker® will complement any interior and looks like it was factory installed. The Windblokker® is easy and fast to install because the brakets fit under the top frame or tonneau cover.This Windblokker® can be folded down when not in use. The Windblokker will fit the stow away style top and the fold back style top. Windblokker will fold down for use of tonneau cover.



Considerably less wind noise inside the cockpit
Easier to make any calls from your cell phone
Your partner or companion will love it
Now you can keep the top down all the time and enjoy your MGB
Fully tested at high speeds
The Windblokker® can stay in place even when the convertible top is closed thus no removal necessary.

Recommended Maintenance:

It is best to clean your Windblokker® frame with ArmorAll®. The nylon mesh center may be brushed gently with a soft clothing brush every so often


Installation:

Remove the two screws that attaches the top bow to the body of vehicle
Loosen the third screw, pull the bow forward and slide bracket behind bow
Replace the two screws and tighten all three screws
Repeat for opposite side
Now install windblokker on the brackets using the two thumb screws provided


C.T. Irwin

Tyler, Jeff Zorn at LBC was selling mesh MGA windblockers for a while, but they seem to have dropped off his website...maybe give him a call.
Gary Lock

This thread was discussed between 27/09/2010 and 30/09/2010

MG MGA index

This thread is from the archive. The Live MG MGA BBS is active now.