MG-Cars.com
MG MGA Removing Flywheel BBS discussion at MG-Cars.net
MG-Cars.net
Welcome to our resource for MG Car Information.
Recommendations
Parts
MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.
|
|
MG MGA - Removing Flywheel
| The workshop manual says one must remove the main bearing cap to remove the flywheel bolts. Is that correct or can the flywheel be removed without messing with the bearing cap? (Plus, can the flywheel be properly put back in without removing the bearing cap?) Thanks! |
| Steven B |
| The flywheel bolts are a press fit, and are inserted from the side opposite the flywheel. To remove the flywheel from the engine, you just have to remove the flywheel NUTS. The only reason to remove a flywheel bolt is to replace a damaged one. |
| Del Rawlins |
| That worked! I love this site! Steve |
| Steven B |
This thread was discussed between 22/04/2007 and 23/04/2007
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.