MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGA - Source for outer body panel parts

I know this subject has been extensively covered in previous threads, but history is no indication of the present. I need to replace the right outer sill and the lower, about 9 inches, forward portions of the rear fenders (dogleg?). Does anyone have any recent experience with these parts?
FJ Bruns

KAS in Australia are a major supplier around the world that make quality panels. See web site below if your supplier sources from KAS you can be assured of a quality product.

http://www.kas-kilmartin.com.au/MG%20Description%20List.htm

Mike
Mike Ellsmore

http://mgaguru.com/mgtech/restore/restore4.htm
Barney Gaylord

I endorse Mike's comments above - you will not get better than KAS panels. Try this link as Mike's did not work for me.

www.kas-kilmartin.com.au/‎

Good luck, Barry
BM Gannon

Much thanks for the help. This forum always comes through. I talked with KAS and they don't have a distributor in the US, and the shipping added too much. I decided to go with Crate Parts (Eclectic Motorworks) for the rocker panel - a commercial part "corrected" to fit. I'm still looking at the dog leg repair parts, deciding whether to go with the larger repair panel (top to bottom) or the smaller parts. The damage to both sides is in the lower 8" of the front (door) end of the fender.
FJ Bruns

I have used the Eclectic Motorworks rockers, they are excellent.
George G.

Me too.Used all Kilmartin's panels on my MGA and now on my Healey. Greg and John are great to deal with and everything fits!
Matthew
m s randell

This thread was discussed between 20/01/2014 and 24/01/2014

MG MGA index

This thread is from the archive. The Live MG MGA BBS is active now.