Welcome to our resource for MG Car Information.
|
MG MGA - Steering uni joint slope - thanks Barney
I have always had slope on the lower splines of the steering uni joint on my coupe no matter how hard I tightened the bolt. Reading Barney's travelogue I saw his fix for this problem on Friday 8 May and his reference to the cms.. It was all there on the guru site only I hadn't looked. http://mgaguru.com/mgtech/care/csm/mg214.pdf Another job coming up! Mike |
Mike Ellsmore |
Not sure where the "e" came from - should be "slop"! |
Mike Ellsmore |
I didn't realise the bolt was a 'special' one, will have to check mine. |
John Bray |
This thread prompted me to investigate. I had abot 1/4" play at the wheel which I had attributed to slack in the rack. However, both sides of the U joint were not tight enough! Now it is free of all play. Is it possible to jump splines if the bolts are not tight? |
Art Pearse |
I don't think it would jump the slines but what bugged me as you pulled on the steering wheel getting in it moved in and out a smidge. Mike |
Mike Ellsmore |
This thread was discussed between 26/05/2015 and 27/05/2015
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.