MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGA - Steering wheel center piece

Could anyone tell me the mounting dimensions of the original style steering wheel center piece? I have a Lecarra steering wheel. The inside dimension of the mounting hub is 3.25”. Will the Original style center piece fit?

John



jbackman

Don't think so John. I've just run out and measured mine. The original MG Centre piece inside diameter is 2.75 inches. Two inches and threequarters. Clive
c allen

Clive,

Thanks for checking. I was afraid that it would not be a fit. I have a cheapo version to a least plug the hole.

John
jbackman

If you used a piece of plastic pipe of the correct ID and OD, or a piece of flexible plastic of 1/4 thickness around the aperture you could just make a spacer, which would be mostly hidden by the original's flange
dominic clancy

Dominic,

Thanks for the suggestion. Knowing the dimensions gives me a bit more confidence to go ahead and give it a try.

Any idea of the width of the flange?

John
jbackman

John, My centre piece shows Depth of flange 5/8". Its rim thickness is 1/8". The outside Dia. is 2"5/8. Hope you can make sense of this. Unfortuately I cannot send you a picture as my computor is on the fritz in that department. All the best. Clive.
c allen

This thread was discussed between 06/04/2013 and 07/04/2013

MG MGA index

This thread is from the archive. The Live MG MGA BBS is active now.