Welcome to our resource for MG Car Information.
|
MG MGA - Torque for Front Gearbox Cover
What is the proper torque for the seven nuts that hold the front cover on the gearbox? Thanks |
Thomas Koch |
5/16" studs-----20 ft/lb-- |
William Revit |
All the info you need on thread torques here, print it off and hang in your garage. http://www.mgaguru.com/mgtech/universal/ut120.htm Mike |
Mike Ellsmore |
This thread was discussed between 23/05/2021 and 24/05/2021
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.