Welcome to our resource for MG Car Information.
|
MG MGA - TRW/Lucas Master Cylinder Update
Due to an incorrect and leaky Sprite master cylinder and a heavily corroded original unit that was too far gone, I decided to purchase a new one. With the favorable exchange rate, I found a TRW/Lucas setup delivered to Japan for about $130. I decided to take Barney's advice and modify the flow control valve by drilling a small hole on the side immidiately after unpacking it. I proceeded to install it and there it sat for almost a month as work and family responsibilities took over. Last weekend I pulled out the Eezibleed and flushed the air and old fluid from the system. It was just starting to rain but I didn't want to waste an opportunity to go for a drive. I'm pleased to report no issues, but I did have to re-learn the clutch operation as the original 3/4 bore master cylinder required quite a long stroke. |
Tom Baker |
This thread was discussed on 23/05/2013
MG MGA index
This thread is from the archive. The Live MG MGA BBS is active now.